Portland’s Clogged Shower Head

What to do about Portland’s Clogged Shower Head?

Have you ever gone to take a shower and your shower head only gives you drips of water?  Well, you may just have a Portland’s Clogged Shower Head.  Bad news is you will have to do something about the shower head, good news is it’s an easy fix…Better news is All Pro is right here in the case of any mishaps.

Shower heads can easily clog up due to mineral deposits collecting in the fine mesh and holes.  Here are a few easy steps to unclog your Portland’s Clogged Shower Head:

1. Try to remove your Portland’s Clogged Shower Head. You don’t have to do this, but it is highly encouraged. Most shower heads can be removed by hand without screws, but check to see if there are any screws first before removing. If you can’t remove the shower head by by hand then carefully use a pair of pliers or pipe wrench.  Also, please note how the shower head was put together because there may be several parts.

2. Get a bucket or bag and fill it with white vinegar.

3. Submerge your showerhead and allow a 5-6 hours for soaking.

4. Remove the showerhead. After a few hours, remove and scrub with a toothbrush or small brush.

5. Rinse with water and re-attach.

And that is how you can fix Portland’s Clogged Shower Head.

For further assistance on any of your plumbing needs or for more help on Portland’s Clogged Shower Head call All Pro Plumbing at (503) 579-5555.